148.绘制蓝天图案

简介: 148.绘制蓝天图案
#include <stdio.h>
#include <dos.h>
#include <math.h>
long Addr[768];
int Mode;
Set_Mode (int mode) /*设置显示的模式,参数为INT 10H的子功能号*/
{
    union REGS r;
    r.h.ah=0;
    r.h.al=mode;
    int86 (0x10,&r,&r);
}
Set_Graphics_Mode (unsigned x,unsigned y) /*设置图形模式的分辨率*/
{
    long i;
    if ((x<321)&&(y<201))  {
        Set_Mode (0x13);
        Mode=0x13;
        for (i=0;i<200;i++)  Addr[i]=320*i;
    }
    else if ((x<641)&&(y<401))  {
        Set_Mode (0x5c);
        Mode=0x5c;
        for (i=0;i<400;i++)  Addr[i]=640*i;
    }
    else if ((x<641)&&(y<481))  {
        Set_Mode (0x5d);
        Mode=0x5d;
        for (i=0;i<480;i++)  Addr[i]=640*i;
    }
    else if ((x<801)&&(y<601))  {
        Set_Mode (0x5e);
        Mode=0x5e;
        for (i=0;i<600;i++)  Addr[i]=800*i;
    }
    else if ((x<1025)&&(y<769))  {
        Set_Mode (0x62);
        Mode=0x62;
        for (i=0;i<768;i++)  Addr[i]=1024*i;
    }
    else  {
        Set_Mode (3);
        printf ("Not support this mode .\n");
        getch ();
    }
}
set_pattern () /*设置调色版*/
{
    int i;
    unsigned char pat[256][3];
    struct SREGS inreg;
    union REGS reg;
    pat[0][0]=0;pat[0][1]=0;pat[0][2]=0;
    for (i=1;i<=255;i++)  { /*设置调色版的颜色*/
        pat[i][0]=(unsigned char)((float)(abs(i-127)*63)/127.0+0.5);
        pat[i][1]=(unsigned char)((float)(abs(i-127)*63)/127.0+0.5);
        pat[i][2]=63;
    } 
    reg.x.ax=0x1012; /*设置VIDEO调色版的颜色块*/
    reg.x.bx=0;
    reg.x.cx=256;
    reg.x.dx=FP_OFF(pat);
    inreg.es=FP_SEG(pat);
    int86x (0x10,&reg,&reg,&inreg);
}
plot (int x,int y,unsigned char color) /*使用指定的颜色画点*/
{
    long offset;
    char Page;
    unsigned char far *address;
    switch (Mode)  {
        case 0x13:
            offset=Addr[y]+x;
            address=(unsigned char far *)(0xa0000000L+offset);
            *address=color;
            break;
        case 0x5c:
        case 0x5d:
        case 0x5e:
            offset=Addr[y]+x;
            Page=(offset>>16);
            outportb (0x3c4,0xe);
            outportb (0x3c5,Page^0x02);
            offset=offset&65535;
            address=(unsigned char far *)(0xa0000000L+offset);
            *address=color;
            break;
        case 0x62:
            offset=Addr[y]+x;
            Page=y>>6;
            outportb (0x3c4,0xe);
            outportb (0x3c5,Page^0x02);
            offset=offset&65535;
            address=(unsigned char far *)(0xa0000000L+offset);
            *address=color;
            break;
        default:
            break;
    }
}
get_pixel (int x,int y) /*获得点颜色*/
{
    long offset;
    char Page;
    unsigned char far *address;
    unsigned char color;
    switch (Mode)  {
        case 0x13:
            offset=Addr[y]+x;
            address=(unsigned char far *)(0xa0000000+offset);
            color=*address;
            break;
        case 0x5c:
        case 0x5d:
        case 0x5e:
            offset=Addr[y]+x;
            Page=(offset>>16);
            outportb (0x3c4,0xe);
            outportb (0x3c5,Page^0x02);
            offset=offset&65535;
            address=(unsigned char far *)(0xa0000000L+offset);
            color=*address;
            break;
        case 0x62:
            offset=Addr[y]+x;
            Page=y>>6;
            outportb (0x3c4,0xe);
            outportb (0x3c5,Page^0x02);
            offset=offset&65535;
            address=(unsigned char far *)(0xa0000000L+offset);
            color=*address;
            break;
        default:
            break;
    }
    return (color);
}
randint (unsigned int range) /*生成随机数*/
{
    float sigma=423.1966;
    static double OldRand=0.4231967;
    double temp;
    temp=sigma*OldRand;
    OldRand=temp-(int)temp;
    return (int)(OldRand*(float)range);
} 
void New_Col (int xa,int ya,int x,int y,int xb,int yb) /*生成新的颜色*/
{
    unsigned int color;
    color=abs(xa-xb)+abs(ya-yb);
    color=randint(color<<1)-color;
    color=color+(get_pixel(xa,ya)+get_pixel(xb,yb)+1)>>1;
    if (color<1)  color=1;
    else if (color>255) color=255;
    if ((get_pixel(x,y)==0)) plot (x,y,color);
}
void Sub_Divide (int x1,int y1,int x2,int y2) /*递归填充一块区域*/
{
    int x,y;
    unsigned char color;
    if (!((x2-x1<2)&&(y2-y1<2)))  {
        x=(x1+x2)>>1;
        y=(y1+y2)>>1;
        New_Col (x1,y1,x,y1,x2,y1);
        New_Col (x2,y1,x2,y,x2,y2);
        New_Col (x1,y2,x,y2,x2,y2);
        New_Col (x1,y1,x1,y,x1,y2);
        color=(get_pixel(x1,y1)+get_pixel(x2,y1)+get_pixel(x2,y2)+get_pixel (x1,y2)+2)>>2;
        plot (x,y,color);
        Sub_Divide (x1,y1,x,y);
        Sub_Divide (x,y1,x2,y);
        Sub_Divide (x,y,x2,y2);
        Sub_Divide (x1,y,x,y2);
    }
}
main ()
{
    int x,y;
    x=320;y=200;
    Set_Graphics_Mode (x,y);
    set_pattern ();
    plot (0,0,randint(254)+1);
    plot (x-1,0,randint(254)+1);
    plot (x-1,y-1,randint(254)+1);
    plot (0,y-1,randint(254)+1);
    Sub_Divide (0,0,x-1,y-1);
    getch();
    Set_Mode (0x03);
}
相关文章
|
1月前
一个最优美的图案
一个最优美的图案。
33 4
|
4月前
|
计算机视觉 Python
图像绘制以及写字
【7月更文挑战第28天】图像绘制以及写字。
32 7
|
6月前
|
数据可视化 定位技术 开发者
黑白或彩色线稿地图设计定制装饰画中线条轮廓素材底图获取方法合集
黑白或彩色线稿地图设计定制装饰画中线条轮廓素材底图获取方法合集
Photoshop制作空心圆柱体与立体烟缸
Photoshop制作空心圆柱体与立体烟缸
123 0
EasyX颜色+绘制彩虹色天空
今天夜里想搞一搞easyx(doge)
147 0