如何恢复交换机出厂值

简介:
如何恢复交换机出厂值
实验地点 :2 楼第三机房
实验环境:  11 号计算机 ,2 号交换机
/*****************************************************************************/
远程登陆
开始运行---telnet 172.16.3.200
User Access Verification
 
Username: benet.cn
Password:
swich-Server#clear line tty 2
[confirm]
 [OK]
swich-Server#clear line tty 2
[confirm]
 [OK]
swich-Server#clear line tty 2
[confirm]
 [OK]
swich-Server#s2
Trying s2 (1.1.1.1, 2002)... Open
/***********************************************************************/
Switch#erase startup-config
Erasing the nvram filesystem will remove all files! Continue? [confirm]
[OK]
Erase of nvram: complete
Switch#reload
 
System configuration has been modified. Save? [yes/no]: y
Building configuration...
[OK]
Proceed with reload? [confirm]
 
00:34:55: %SYS-5-RELOAD: Reload requested
 
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(6)EA2c, RELEASE SOFTWARE (fc1)
Compiled Thu 28-Feb-02 14:59 by antonino
WS-C2950-24 starting...
Base ethernet MAC Address: 00:09:b7:8c:74:40
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 18 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 3978752
flashfs[0]: Bytes available: 3762688
flashfs[0]: flashfs fsck took 6 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading "flash:c2950-i6q4l2-mz.121-6.EA2c.bin"...###############################
################################################################################
 
File "flash:c2950-i6q4l2-mz.121-6.EA2c.bin" uncompressed and installed, entry po
int: 0x80010000
executing...
 
              Restricted Rights Legend
 
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
 
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
 
 
 
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(6)EA2c, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 28-Feb-02 14:44 by antonino
Image text-base: 0x80010000, data-base: 0x8042C000
 
 
Initializing flashfs...
flashfs[1]: 18 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 3978752
flashfs[1]: Bytes available: 3762688
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
 
POST: FRONT-END LOOPBACK TEST : Passed
cisco WS-C2950-24 (RC32300) processor (revision C0) with 21295K bytes of memory.
Processor board ID FOC0620Z0D0
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
 
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:09:B7:8C:74:40
Motherboard assembly number: 73-5782-10
Power supply part number: 34-0965-01
Motherboard serial number: FOC06190PMS
Power supply serial number: DAB06193H3L
Model revision number: C0
Motherboard revision number: A0
Model number: WS-C2950-24
System serial number: FOC0620Z0D0
 
 
Press RETURN to get started!
 
 
00:00:17: %SYS-5-CONFIG_I: Configured from memory by console
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(6)EA2c, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 28-Feb-02 14:44 by antonino
00:00:17: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively do
wn
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state t
o down
Switch>
Switch>
Switch>
Switch>


本文转自凌激冰51CTO博客,原文链接:http://blog.51cto.com/dreamfire/97961,如需转载请自行联系原作者
相关文章
|
传感器 虚拟化
故障案例-ESXI6.5主机无法发生重启,并有发生网卡无故UP DOWN的事件
VSAN环境下的一台ESXI6.5主机无法发生重启,并发生网卡无故UP DOWN的事件.以下是故障分析过程和解决方法
3092 0
|
2月前
|
运维 安全
|
7月前
|
存储 安全 网络安全
网工大题题型总结(2)---设备类型及设备故障问题
网工大题题型总结(2)---设备类型及设备故障问题
214 2
|
存储 数据安全/隐私保护 网络架构
路由器设备管理 以及 交换机、路由器 密码设置与恢复
一、路由器硬件概述 如同计算机一样,路由器也是由各种各样的硬件组成的,并且每个硬件所具备的功能各不相同。
253 0
|
存储
HVAC 电容器有什么作用?为什么会出现 故障?(更换提示)
HVAC 电容器是一种小型设备,对空调的可靠运行起着关键作用。它在制冷循环期间为空调提供能量。它具有非常高的电压和高电容,因此很危险。本文将简单介绍HVAC电容器的详细信息、如何检测故障电容器以及更换故障电容器的技巧。
500 0
HVAC 电容器有什么作用?为什么会出现 故障?(更换提示)
如何判断设备使用网络的状态
如何判断设备使用网络的状态
168 0
|
网络架构
无线路由器的“克隆MAC地址”是干什么作用的?
本文章转载:http://blog.sina.com.cn/s/blog_4c900d100102uysb.html 1、问题: 无线路由器的“克隆MAC地址”是干什么作用的?怎样使用? 2、使用背景: 个别地区的宽带运营商(联通公司、电信公司等)默认的是:一个宽带帐号只允许你一台电脑上网,并暗中把你电脑的MAC地址(实际上是把你电脑网卡的MAC地址)记录保存到他们的服务器中,并与宽带帐号捆绑在了一起。
1747 0
Win10没有以太网图标如何找回?以太网适配器不见了怎么恢复?
Win10以太网适配器不见了怎么恢复?以太网其实就是Win7系统中常说的“本地连接”假若用户发现网络适配器中的以太网适配器图标不见了,可以在设备管理器中添加一些这类适配器,具体过程请看下文。   Win10以太网适配器不见了怎么恢复?   1、在开始菜单上右键,打开“设备管理器”。
1685 0